Prices incl. VAT plus shipping costs
- Order number: KS-22OR2HMB
- Supplier Article No.: KS22/OR2HMB
- Article Weight 0.8 kg
- EAN: 0750783913546
- Variant: 2x carbide plate
Product information "Chain knocker with carbide plates 22mm T-Nut (7/8") by rak"
The chain knocker with hard metal belts from rak was especially developed for renovations and heavy incrustations. The two plates mounted on the chains are fitted with tungsten carbide trimmings which are brazed on. The chain knocker can thus be used to remove very hard deposits on the pipe wall, but also to roughen the inside of pipes. This is necessary, for example, for renovation work in pipes.
In order to keep the 220mm chain head as flexible as possible, the spring wire between the T-Nut coupling and the head of the tool is wound wide. This results in a higher curve mobility. The chains are welded to the head as well as to the coupling and can be completely replaced (re-welded). The chain knocker can thus be repaired. The chains with carbide band are available from us as spare parts. The chain head with carbide band should always be used only with reinforced drain cleaning cables (S-spirals, S-SMK-spirals).
Technical data of the chain knocker with carbide band and 22mm T-Nut by rak:
- Maximum diameter: 160mm, length: 220mm
- Chains with plates and brazed carbide inserts
- Available with 2 or 4 chains
- Working range: 75-150mm
- Coupling: bevelled 22mm T-Nut coupling
|Application:||Branches & Roots, Final Cleaning, Grease, Hard Incrustations, Incrustation, Lime Scale, Soap scum, Soft disposals, Urine scale|