No results were found for the filter!
The drain cable extension adapter with Rioned square coupling is used to connect a larger drain cleaning cable or a larger drain cable tool with 20 mm square coupling (Master) to a smaller square drain cleaning cable with 16 mm coupling...
Content 1 Stück
65.39€ *
Net price: 54.95€
Dieser Bohrkopf verfügt nicht über die traditionellen Hartmetallspitzen, die mit der Schneide verschmolzen sind. Stattdessen haben wir eine Reihe von Wellenbergen und Wellentälern eingearbeitet, die eine Beschädigung der Rohrwand...
Content 1 Stück
From 33.26€ *
Net price: 27.95€
The chain with carbide is used to replace worn out, worn out or torn off chains of the chain knockers. It must be welded to the chain knocker for this purpose. These carbide spikes on the chain also destroy very hard incrustations such...
Content 1 Stück
From 36.83€ *
Net price: 30.95€
The Cyclone chain knocker is specially designed for drain cleaning in very poor condition, which may even be damaged. Due to the centrifugal force the circular chain acts perpendicular to the axis over the full circumference of the pipe....
Content 1 Stück
From 185.58€ *
Net price: 155.95€
This special version of rak's chain knocker has a double 16mm T-Nut coupling: at the top of the chain knocker there is a 16mm pin coupling. The chain knocker can thus be used in combination with a drain cable tool, thus extending its...
Content 1 Stück
From 193.91€ *
Net price: 162.95€
The cup auger from rak for 22mm drain cables can be used to drill out pipe blockages as well as to wrap objects and recover them from the pipe. Due to its cup shape it comes close to the pipe wall. This makes it especially suitable for...
Content 1 Stück
42.78€ *
Net price: 35.95€
The E&R fork cutter with square coupling has been developed for the abrasion of soft blockages and deposits, but also foreign bodies such as cellulose or small branches in the pipe. Due to its shape it reaches right up to the pipe wall....
Content 1 Stück
From 48.73€ *
Net price: 40.95€
E&R's retrieving auger is a cable tool specially designed for retrieving foreign bodies in the drain. The untwisted tip threads itself into soft materials such as textiles, so that these can then be pulled out of the pipe with the drain...
Content 1 Stück
42.78€ *
Net price: 35.95€
The chain knocker is one of the most important drain cable tools at all. This variant for 16mm drain cables has a spiral core of only 8mm thick and is kept extremely bendable to allow for improved bowing. The chain knocker is available...
Content 1 Stück
From 107.04€ *
Net price: 89.95€
With the cable adapters for Rioned square coupling, you can, for example, connect AllroundPlus drain cleaning cables with 16mm and Master drain cables with 20mm diameter. You can also attach a 20mm square tool to the end of a 16mm...
Content 1 Stück
64.20€ *
Net price: 53.95€
The chain knocker with hard metal belts from rak was especially developed for renovations and heavy incrustations. The two plates mounted on the chains are fitted with tungsten carbide trimmings which are brazed on. The chain knocker can...
Content 1 Stück
From 315.29€ *
Net price: 264.95€
The drain cable reduction piece with square coupling is used to connect a larger drain cleaning cable with 20mm square coupling (20mm) to a smaller drain cleaning cable or a smaller cable tool with16mm square coupling (or 13mm). The...
Content 1 Stück
61.82€ *
Net price: 51.95€
Viewed