Products from ROKA Store

2 From 8
No results were found for the filter!
Hint!
Drain cleaning device with drain cable 6,4mm x 7,5m
Drain cleaning device with drain cable 6,4mm x 7,5m
Key facts and usage notes Drain cleaning made simple: This drain auger holds a 7.5m cable with a 6.4mm diameter. Clear your blocked drain yourself, quickly and easily – no call-out, no waiting around Matched to your pipework: Suitable...
Content 1 Piece
29.99€ *
Net price: 25.20€
Chain knocker mit carbide-Spikes, 16mm T-Nut (7/8")
Chain knocker with 3 carbide chains, 16mm T-slot (5/8")
The Seweri chain knocker has been developed for the toughest applications in drain cleaning and for preparing inliner renovations. It has 3 chains, which are equipped with carbide. These carbide spikes destroy even very hard...
Content 1 Piece
From 135.60€ *
Net price: 113.95€
chain knocker with carbide spikes, 22mm T-Nut (7/8")
Chain knocker with 3 carbide chains, 22mm T-slot (7/8")
The chain knocker from Seweri has been developed for the toughest applications in drain cleaning and in preparation for inliner rehabilitation. It has 3 chains, which are equipped with carbide. These carbide spikes destroy even very hard...
Content 1 Piece
From 160.59€ *
Net price: 134.95€
Kettenschleuder mit Hartmetall-Bohrkopf und Spikes, 16mm T-Nut (5/8")
Chain knocker with carbide drill head and spikes, 16mm T-slot (5/8")
The chain knocker with integrated drill head from Seweri has been developed for the toughest applications in drain cleaning. With this special drain cable tool, you can simultaneously drill out a pipe blockage in the direction of flow...
Content 1 Piece
From 160.59€ *
Net price: 134.95€
Chain knocker Cyclone with carbide spikes 22mm T-Nut (7/8")
Teller-chain knocker "Cyclone" with carbide spikes, 22mm T-slot (7/8")
The Cyclone chain knocker is specially designed for drain cleaning in very poor condition, which may even be damaged. Due to the centrifugal force the circular chain acts perpendicular to the axis over the full circumference of the pipe....
Content 1 Piece
From 185.58€ *
Net price: 155.95€
Chain with carbide spikes for chain knockers
Chain with carbide spikes for chain knockers for drain cleaning
The chain with carbide is used to replace worn out, worn out or torn off chains of the chain knockers. It must be welded to the chain knocker for this purpose. These carbide spikes on the chain also destroy very hard incrustations such...
Content 1 Piece
From 36.83€ *
Net price: 30.95€
Chain knocker with carbide drill head and spikes, 22mm T-Nut (7/8")
Chain knocker with carbide drill head and spikes, 22mm T-slot (7/8")
The chain knocker with integrated drill head from Seweri has been developed for the toughest applications in drain cleaning. With this special drain cable tool, you can simultaneously drill out a pipe blockage in the direction of flow...
Content 1 Piece
From 222.47€ *
Net price: 186.95€
Hint!
Drain cleaning device with drill connection
Drain cleaning device with drain cable 6,4mm x 7,5m and drill connection
Key facts and usage notes Crank by hand or drive it electrically: This drain auger can be turned by hand using the handle, or connected to a cordless screwdriver or power drill via the centred bolt – your choice, depending on the...
Content 1 Piece
29.99€ *
Net price: 25.20€
Drain cleaning cable 6.4mm x 7.5m with bulb head
Drain cleaning cable 6,4mm x 7,5m with bulb head
The drain cleaning cable with a diameter of 6.4mm and a length of 7.5m metres is ideal for cleaning pipes in the household between the wall connection and downpipe. On the one hand, it is very flexible to pass through narrow pipes with...
Content 1 Piece
36.83€ *
Net price: 30.95€
Drain cleaner of flat wire
Drain cleaner aus flat wire, 6m
Drain cleaning made easy: Drain cleaner made of hardened flat steel for high flexibility and strength Intelligent design: round magazine with crank handle for easy stowage and storage Maximum stability: the hardened steel offers maximum...
Content 1 Piece
9.99€ *
Net price: 8.39€
Chain head with 40mm carbide drill head & spikes 22mm T-Nut (7/8")
Chain knocker with carbide drill head 40mm and spikes, 22mm T-slot (7/8")
This chain knocker is a special design for milling work in pipes. The large, mounted 40mm drill head is equipped with extremely hard carbide. It drills into heavy incrustations and deposits such as concrete, urine stone, lime,...
Content 1 Piece
From 272.45€ *
Net price: 228.95€
Push tip for drain cleaning cable 1/2" WW thread
Push tip for drain cleaning cable with 1/2" WW thread
The push tip makes it possible to push open drain blockages. It is simply screwed onto the drain cleaning cable with threaded coupling. The push tip is available with 25mm diameter and 40mm length (for the 10mm spirals) as well as a...
Content 1 Piece
From 26.12€ *
Net price: 21.95€
2 From 8
Viewed