Drain cleaning device with drain cable 6,4mm x 7,5m

Key facts and usage notes

• Drain cleaning made simple: This drain auger holds a 7.5m cable with a 6.4mm diameter. Clear your blocked drain yourself, quickly and easily – no call-out, no waiting around
• Matched to your pipework: Suitable for pipes from 50mm internal diameter where the run includes bends. On straight runs you will get there from 30mm upwards – what decides it is the 16mm bulb auger head, which needs room to turn through a 90-degree bend
• Wide range of use: The cable with bulb auger head clears the usual blockages caused by hair, paper, wet wipes, food residue, grease and hygiene products in basins, showers, bathtubs and kitchen sinks
• Straightforward to operate: Pull out the cable, feed it in until it meets the blockage, tighten the wing screw and turn the handle – light pressure is enough to bore through
• Purely mechanical and reusable: You clear blockages without any chemical drain cleaner. After use, simply push the cable back into the drum and leave it to dry in a well-ventilated spot

Product description

The ROKA Store drain auger is an ideal tool for anyone who would rather clear a minor blockage themselves than wait for a plumber. At only 6.4mm, the cable is flexible enough to follow tight pipework. The limit is set not by the cable but by the 16mm bulb auger head wound onto its tip: on a straight run you can work in pipes from 30mm upwards, while a run with 90-degree bends calls for at least 50mm internal diameter. That covers the vast majority of bathroom and kitchen drains.

Cleaning is purely mechanical – no chemical substances are involved. Unlike a bottle of drain cleaner, the tool can be used as often as you like and goes back in the cupboard afterwards rather than in the bin.

How to use it

Loosen the wing screw and pull the cable out of the drum to the length you need, then feed it directly into the pipe. Retighten the wing screw so the cable is clamped in place. Turning the handle while pressing gently on the cable bores carefully through the blockage. Work in short stages and draw the cable back a little now and then, rather than forcing it further in.

Afterwards, rinse the cable with clean water if necessary and push it back into the drum, where it can dry in a well-ventilated place. Spraying it with a suitable oil protects against corrosion and extends its service life.

Product safety information

Always wear suitable gloves and safety goggles when cleaning drains, to protect yourself from waste water, and follow the enclosed instruction manual.