Carbide drill head with straight head, 16mm T-slot (5/8")

The straight carbide head from ROWO has been developed for the hardest drain blockages. On the flat front side there are pins made of carbide, which drill into concrete, urine scale, lime, industrial deposits and other hard incrustations in the pipe. Different diameters are available, so that the best variant can be chosen depending on the plugging and pipe diameter. The drill heads are especially suitable for down pipes.

Up to a diameter of 35mm the carbide miller is closed at the front, from 45mm diameter the front is ring-shaped. This has the advantage that it is not necessary to work with the full surface, but the blockage can be milled out in a ring shape on the outside. The pins are made of extremely  and are soldered firmly to the drill head.

The carbide head has a 16mm T-Nut coupling for connection to drain cleaning cables. For milling work, reinforced drain cables, i.e. S drain cables or S drain cables with core, should always be used. This is the only way to ensure maximum power transmission from the drain cleaning machine to the tool.

Technical data of the straight carbide miller with 16mm T-Nut:

• solid design (up to 35mm) or ring (from 45mm) with carbide
• diameter: 20mm / 25mm / 30mm / 35mm / 45mm / 50mm / 55mm
• working ranges: 30-50mm / 35-50mm / 40-50mm / 50-70mm / 60-100mm / 70-100mm / 70-125mm
• Coupling: 16mm / 5/8" T-Nut, bevelled
• Material: Stainless steel with tungsten carbide pins