Pipe inspection camera pan-tilt 60m with 65mm camera head

The pipe camera with a push cable of 60m is used to inspect sewers and pipes. At the top of the camera is a motorized camera head capable of moving 360° horizontally and 180° vertically. In addition, the camera has a motorized focus that allows field of view depths from 20 to 100 cm. The robust steel trolley is supplied together with the pipe camera. An optional guide skid is also available, on which the camera head can be mounted. In this way, pipes and ducts with a diameter of 100 to 1200 mm can be traversed. This HD system is ideal for anyone who needs a high quality and versatile inspection camera.

The HD system is equipped with 1920x1080p resolution, providing crisp images. The accompanying 10.1 inch portable monitor controller allows for easy operation of the system and provides a clear image display. The system can be used to record video, audio, and take photos, even while recording video. Recording can be done on an SD card or USB flash drive, both with a maximum capacity of 256GB. A keyboard is provided to enter texts quickly and easily. The battery consists of a polymer lithium battery with a capacity of 6000mAH and a voltage of 12V. The system can also be connected to external monitors with the HDMI output.

The system comes with a 60m push cable equipped with a meter counter that provides 0.1m accuracy. The cable diameter is 10.3mm. The camera head has an axial diameter of 60mm; at the least favourable pan angle its envelope measures 65mm. It can be swivelled and tilted. Optionally, a 512 Hz transmitter can be installed (not included!). The size of the camera head is 65mm x 144mm and is waterproof to IP68 with the push cable. Four ultra bright 8 watt LEDs provide excellent illumination to ensure a clear view even in difficult lighting conditions.

Specifications of this HD tube camera system:

• HD system with 1920x1080p resolution
• Portable 10.1 inch monitor controller
• Video/audio recording and photo capture, even during video recording
• Recording to SD card/USB stick (both up to max. 256GB)
• Keypad for writing texts
• Battery: polymer lithium battery 6000mAH 12V
• HDMI output for external monitors
• 60m push cable
• Meter counter with meter or feet
• Meter accuracy: 0.1m 
• Cable diameter 10.3 mm
• Camera head with 65 mm diameter for pan and tilt (512-Hz transmitter optional, not included)
• Camera head size: 65mm x 144mm
• Camera head with push cable waterproof according to IP68 
• LEDs: 4 pcs, ultra bright, 8 watts
• Camera resolution: 1920x1080 pixel
• Guide skid: 80mm and 170mm–300mm (adjustable)
• Optionally available: guide skid for pipes from 300mm to 600mm (adjustable)
• Suitable for pipe size: 100–1200mm

Product safety information

• Do not operate this device in potentially explosive areas, for instance in the presence of flammable liquids, gases, hazardous chemicals, overheated liquids or heavy dust. Sparks may occur that could ignite the dust or vapours.
• The camera head and push cable are waterproof, but the digital video recorder and the connecting cable are not. Do not expose them to water or rain; doing so increases the risk of electric shock.
• Avoid using the device in environments with extreme cold, heat or humidity, as this may damage it.
• Do not knock or press on the device.
• Always back up your data before connecting your SD storage to the system. The manufacturer accepts no liability for data damaged on the SD storage medium, whatever the cause.
• Do not disconnect the device from the computer while saving or playing back. This could damage the device and/or the SD storage.
• Only qualified persons may repair this device. Servicing or maintenance by unqualified persons may result in injury.
• Do not use this device in places where high-voltage equipment is present. The device has no protection or insulation against high voltage.
• Inspect or service this device regularly and have it repaired by qualified persons if damaged. Use original spare parts only.