Drain brush tool with pin coupling, plain steel wire, 16mm T-Nut (5/8")

Mechanical drain cleaning instead of high pressure - with the drain brush tool from rak!

The drain brush tool with male coupling as an intermediate piece of a 16mm drain cable is the ideal drain cable tool for pipes where drain cleaning with high pressure rinsing is difficult. It is the perfect alternative for kitchen drains, WC/toilet drains, suspended pipes and ground pipes that are difficult to access with high pressure. The brush enables optimal cleaning of the drain pipes at the end of the removal of a drain blockage, but also in preparation for renovation work. The smooth wire lies against the pipe wall and brushes it free. In doing so, especially adhering grease residues and incrustations, but also fine root meshes and siltations are effectively removed. The drain brush tool completes professional drain cleaning in an optimal way.

This version with smooth wire is suitable for steel, cast iron, stoneware and plastic pipes. The length is 19cm. With the T-Nut, the drain brush tool is simply connected to any 16mm T-Nut drain cleaning cable such as from rak, ROWO, REMS, RIDGID or ROTHENBERGER. At the front end the drain brush tool has a 16mm T-Nut pin coupling for connecting a tool. It is therefore coupled between the drain cable tool and the drain cable.

Application notes

If the drain is clogged, the drain blockage must first be removed with a suitable tool. Then the drain brush tool is used. The version with male coupling can be coupled directly into the drain cable after an intermediate piece (not included in the scope of delivery). This saves an extra work step. When pulling back the brush tool after cleaning, always rinse with (warm) water to rinse the tool and drain pipe clean. To ensure a long life of the brush tool, it is then dried and sprayed with drain cable care or rust protection.