Drain brush tool with pin coupling, flat wire, 22mm T-Nut (7/8")

Mechanical drain cleaning instead of high pressure - with the drain brush tool from rak!

The drain brush tool for the 22mm drain cable is the ideal drain cable tool for pipes where drain cleaning with high pressure rinsing is difficult. It is the perfect alternative for kitchen drains, WC/toilet drains, suspended pipes and ground pipes that are difficult to access with high pressure. The flat wire brush allows optimal cleaning of the drain pipes at the end of the removal of a drain blockage, but also as preparation for renovation work. The flat wire lies against the pipe wall and brushes it free. In doing so, especially adhering grease residues and incrustations, but also fine root networks and silting are effectively removed. The drain brush tool completes professional drain cleaning in an optimal way.

This version with flat wire is suitable for steel, cast iron and stoneware pipes. The length is 23cm. With the T-Nut, the drain brush tool is simply connected to any 22mm T-Nut drain cleaning cable such as from rak, ROWO, REMS, RIDGID or ROTHENBERGER. At the front end the drain brush tool has a 22mm T-coupling pin for connecting another tool.

Instructions for use

If the drain is clogged, the drain blockage must first be removed with a suitable tool. Then the drain brush tool is used. When pulling back the brush tool after cleaning, always rinse with (warm) water to flush the tool and drain pipe clean. To ensure a long service life of the brush tool, it is then dried and sprayed with drain cable care or rust protection.