Chain knocker with carbide chains 16mm T-slot (5/8") from rak

This version of the chain knocker by rak with 16mm T-Nut has special hard metal trimmings which are mounted on the hardened chains. This makes the chains extremely hard and abrasion resistant, which leads to excellent results in drain cleaning. When the drain cleaning cable starts to rotate, the centrifugal forces cause the chains to lie against the pipe wall and work effectively there. This version of the chain knocker with the carbide spikes removes very hard incrustations, but also root ingrowths. To keep the 150mm long drain cleaning tool as flexible as possible, the spring wire between the T-Nut coupling and the head of the tool is wound wide. This results in a higher flexibility.

Chain knockers are an indispensable tool for every end pipe cleaning in pipes. The chains with carbide incrustations are developed for very hard incrustations in stoneware and concrete pipes. The chains are welded on the head as well as on the coupling and can be completely replaced (re-welded). Together with the hardened spikes, worn parts can be renewed individually. The chains with hard metal trimming are available from us as spare parts. The chain knockers with carbide spikes should always be used only with reinforced drain cleaning cables (S-spirals, S-SMK-spirals).

Technical data of the chain knocker with carbide chains and 16mm T-Nut from rak:

• Maximum diameter: 130mm, length: 150mm
• Chains made of hardened steel and soldered carbide spikes
• Available with 2 or 4 chains
• Working ranges: 50-100mm, max. 125mm
• Coupling: bevelled 16mm T-Nut coupling